Safety is above all else, and responsibility is heavier than Mount Tai. Safety work needs to be insisted on, and more importantly, it needs to be maintained. Through clear responsibilities and daily maintenance, normalized safety management, detailed processing, and precise control are realized, and intrinsic safety is finally realized.

Safety rules and regulations need to be maintained regularly

Enterprise safety rules and regulations are the "laws" of enterprise safety work, and they must be strictly implemented first. At the same time, according to the changes in the situation and in accordance with the requirements of the safety management system, regular revisions and improvements should be made, and the inappropriate and inapplicable content should be revised to ensure that "what is written, what is written, and what is done", so that the safety rules and regulations are always compliant and operable, and the guidance and adaptability are enhanced.

Emergency rescue plans need to be maintained regularly

Enterprises should establish a regular evaluation system for emergency plans, analyze the pertinence, practicability and operability of emergency plans, and realize the dynamic optimization and scientific and standardized management of emergency plans. Review and revise the emergency rescue plan in a timely manner, and the circumstances of the revision generally include:

(1) There are major changes in the laws, regulations, rules, standards and relevant provisions in the higher-level plan;

(2) The emergency command organization and its responsibilities are adjusted;

(3) There is a major change in the risk of the accident faced;

(4) Major changes in important emergency resources;

(5) There is a change in other important information in the plan;

(6) Problems found in emergency drills and accident emergency rescue need to be revised;

(7) Other circumstances that should be revised.

Safety training and education need to be continuously improved

Safety education and training is an important means to prevent accidents and ensure the safety of employees. In order to ensure the effectiveness of safety education and training, safety education and training should first be incorporated into the overall training system of the enterprise to ensure the systematization and consistency of the training. At the same time, personalized training plans should be formulated according to the characteristics and risks of different positions, for example, for employees in high-risk positions, practical drills and emergency response ability training should be strengthened. The assessment and evaluation after the training should be strengthened to ensure that employees truly understand and master the training content.

In addition, a safety education and training mechanism for continuous improvement should be established, and the training effect should be tracked and fed back on a regular basis. Through regular safety knowledge competitions, safety skills competitions and other activities, employees are stimulated to learn enthusiasm. The construction of enterprise safety culture should be strengthened, safety awareness should be integrated into the core values of the enterprise, and a strong safety production atmosphere should be created through safety slogans, safety publicity columns, safety culture activities, etc., so that employees can consciously abide by safety rules and regulations and form good safety behavior habits.

Continuous improvement is needed for the investigation and management of hidden dangers

Establish a clear accountability system. By dividing the responsibility area and clarifying the responsible person, we ensure that each hidden danger point is responsible and managed. The responsibility system should cover managers and operators at all levels of the enterprise, forming a work pattern of grasping one level at a time and implementing it at all levels.

Carry out comprehensive and meticulous hidden danger investigation work on a regular basis. During the investigation process, attention should be paid to details, and no hidden dangers should be missed. For the hidden dangers identified, corrective measures should be formulated and rectified in a timely manner. In the process of rectification, attention should be paid to the effect and quality to ensure that potential safety hazards are completely eliminated. At the same time, the rectification process should be tracked and supervised to ensure that the rectification measures are effectively implemented. After the rectification is completed, acceptance and evaluation should also be carried out to ensure that the rectification effect meets the expected goals.

Tooling equipment and facilities need to be maintained

The proper operation of tooling equipment is essential to ensure production efficiency and quality. In order to keep the tooling equipment in good condition, ensure production safety and improve work efficiency, it is necessary to strengthen the maintenance of tooling equipment and facilities. Do a good job of regular inspections, adhere to no missed inspections, no false inspections, and diagnose the whole life cycle, and use intelligent, digital and automated high-tech to intelligently control tooling equipment and facilities, so as to realize the relative intrinsic safety of things.

For different kinds of tooling equipment, it is necessary to inspect according to different frequencies. When repairing and maintaining the equipment, it is necessary to refuel, change the oil, replace the filter element and other important components according to the specified frequency, and regularly clean, lubricate, fasten and other maintenance work of the equipment to prevent the equipment from malfunctioning. At the same time, according to the actual use of equipment, special records should be made for important maintenance work in a timely manner.

Short comment

The original meaning of maintenance is to protect and repair, that is, to protect the "state that should be" and repair the "unreasonable factors", and then gradually expand to protect and maintain the normal operation and stable state of various things. It operates in the form of "protection" and "repair", with the ultimate goal of "normal operation" and "steady state". The object is "all kinds of things", including people's thoughts, the flow of things, and the state of things.

Maintenance is basic, professional, and continuous.

Everything in the business needs to be maintained, especially security. In order to achieve real maintenance, it is necessary to work "seriousness", "professionalism" and "timeliness".

Maintenance should be taken seriously. Whether it is system improvement, process control, hidden danger investigation or equipment maintenance, it is necessary to be attentive and careful, good at finding problems, daring to correct problems, and being meticulous.

Maintenance should be professional. Professionalism is embodied in "normalized professional protection" and "professional repair after problem discovery", so as to achieve accuracy. At the same time, the key maintenance of key areas and the focus on special problems are also the essential requirements of maintaining professionalism.

Maintenance should be timely. Timely includes timing and at any time, and it is necessary to combine timing with any time. Second, the correction, repair, and rectification of the problems found should be timely, so as to quickly eliminate all kinds of potential safety hazards in the bud.

If we do a good job in maintenance, we will lay a good foundation, and we will have a guarantee of safety, and we will be able to ensure the normal operation and stability of all work, and there will be benefits and results.

Editor: Qu Zhaocai

Editor: Tan Fengming